Network for Transport Measures

Step 1. Why sustainable transport requires energy and climate focus

Energy and climate focus > Wikis > Step 1. Why sustainable transport requires energy and climate focus
Energy and climate focus > Wikis > Step 1. Why sustainable transport requires energy and climate focus

A prerequisite for industrialization and global trade was the simultaneous development of freight transport systems. Before the industrial era, local cargo flows were handled by carts pulled by horses or oxen, a method with limited capacity and range that brought very tangible local environmental problems. Until the second half of the 19th century, longer intercontinental transport was carried out solely by sailing ships. The introduction of steam engines, and later internal combustion engines, led to more cost-efficient transport services, which in turn enabled the development of industrial production and trade at local, regional, and global levels.

Initially, the new transport solutions powered by internal combustion engines appeared to be entirely emission-free, as the gaseous emissions simply vanished into the air without a trace! The most noticeable environmental impact was railways and roads land use and consequently “barrier effects” and disturbing noise. Little consideration was given to the negative impacts on human health, nature, or climate. As the economy developed, transport activity and traffic in general increased for all modes of traffic. This led to congestion and a steady decline in air quality. The climate impact of transport was, for the general public, a largely unknown issue even though the greenhouse effect had been understood since the 1820s (thanks to Fourier), and the human impact on the climate through the burning of fossil fuels and the release of greenhouse gases had been recognized since the late 19th century (thanks to Arrhenius).

Over time, it became impossible to ignore the negative impact of transport on health and nature. This has led to measures such as more efficient combustion, after-treatment of fumes, cleaner fuels, and a range of regulations including bans on toxic antifouling paints, requirements for double hulls, and more. Concrete examples include the elimination of lead in gasoline and reduced sulphur content in oil and diesel. Now, more than 150 years later, technical solutions exist that minimize traffic operations´ most severe impacts on nature and health. However, today’s vehicles and vessels have a technical and economic lifespan of 30–50 years. This means it will take a long time before new solutions fully replaces older technology.

The most significant remaining technical, organisational and financial challenge for the transport sector is its climate impact, specifically greenhouse gas emissions and the associated dependence on fossil energy. Globally, we use approximately 100 million barrels of oil per day. Of this, 60 million barrels are used for transport services, with 25–30 million barrels dedicated to freight transport. One barrel of oil equals 159 litres. By a conservative estimate, global freight transport consumes a staggering 4 billion litres of oil every day! If we then convert this into greenhouse gas emissions using a factor of 3.3 kg per litre it amounts to just over 13 billion kilograms of carbon dioxide equivalents per day! While the specific details of this calculation could be debated, the point is to provide a broad overview and understanding of the scale of the challenge. Eliminating greenhouse gas emissions from passenger and freight transport is not a simple task…

In Step 2, we will cover how to assess the current situation using NTMCalc 5.0, stay tuned…